Evaporator
evaporates the water concentrates the
contaminating substances
no rotating parts - no wear easy manual pull-out-minimum inspection and maintenance effort

Recuperator
preheats the process water with the out-flowing distillate
counterflow heat exchanger – optimal heat transfer

Process water inlet
constant liquid level in the evaporator
fully automatic – heat exchanger always wet

The mode
        of operation

ActivePowerClean
mechanical self-cleaning of the system during
operation
high flow rate, maximum heat transfer – minimum maintenance

Separator
patented high-capacity separator for optimum
droplet separation
also suitable for foaming media, maximum
distillate quality

Vacuum pump
generates a vacuum of 600 mbar heats up the distillate to over 120 °C
contactfree stainless steel rotors, minimum energy consumption, with temperature control

QuickStart
quick heating of the cold system to operating temperature
no electric heating – no wear, rapid start-up

Rinsing system
fully automatic for all parts exposed to process water
maintenance-free

Distillate outlet
for direct re-use
2 – 3 meters discharge possible – no pump

Residue outlet
only about 1 – 10% of initial volume
outlet depends on inlet concentration, patented
fully automatic adjustment to varying feedstock
concentration, 2 – 3 meters head – no pump

The evaporator
The contaminated process and waste
water are concentrated in the evaporator.
The system works reliably and safely even with high inlet concentration.

• extremely high concentration increase
• no rotating parts in contact with the
  waste water
• QuickStart replaces electric heater
• fully automatic rinsing

High-flow heat exchanger
The high-flow heat exchanger is an invention
of H2O GmbH. It transfers the condensation energy of the vapour to the waste water.

• natural circulation with high flow rate for
  optimal heat transfer
• mechanical self-cleaning action by
  ActivePowerClean
• for inspection and maintenance, it can
  be pulled out on a rail with a few
  manipulations without using a lifting tool
• constant liquid level, heat exchanger
  always wet

Specifications may change as design revisions take.